| Product Marketing Resources | |||
| A - F | G - L | M - R | S - Z |
|
Low Resolution Images: Right Click Image and Click Save As
High Resolution Images: Click Button Below Image to Download |
|||
| A - F |
| ABC - Asbestos Binding Compound | 6421-Off-White, 6422-Clear, 6423-Green | |||
|
PDS |
Asbestos Overview Asbestos Product Reference |
||
|
ABC Clear:  |
ABC Green: |
||
| Description: | ||||
| ABC Asbestos Binding Compound is a high solids asbestos encapsulant/sealant, designed to encapsulate friable Asbestos Containing Material (ACM) such as fireproofing and insulation material. ABC is an important tool for coping with the health hazards associated with exposure to asbestos fibers. In 1978, ABC was tested for the EPA under contract #68-03-2552-T2005 by Battelle Laboratories of Columbus, Ohio, and found to meet the requirements for the effective encapsulation and removal of ACM. The high solids, nonflammable composition of ABC allows for dilution with water to provide maximum flexibility for specific asbestos abatement needs, including lockdown/ removal, penetrating encapsulation and bridging encapsulation. ABC is also an effective tool for controlling the documented health hazard of exposure to asbestos fibers found present in soil. | ||||
| ABC - Fiberspray | 6410 | |||
|
PDS MSDS Label |
Asbestos Overview Asbestos Product Reference |
||
|
||||
| Description: | ||||
| ABC Fiberspray is a convenient means for applying Fiberlock Technologies’ time proven ABC Asbestos Binding Compound asbestos encapsulant. ABC FiberSpray dispenses encapsulant from a unique 8 ounce “airless-spray” can. This CFC-free “airless-spray” technology minimizes asbestos fiber release, and permits application of encapsulant in any position, even upside down (ideal for use inside glove bags). The ABC encapsulant inside each can was found to meet U.S. Environmental Protection Agency (EPA) test requirements performed at Battelle Laboratories Under Government Contract# 68-03-2552-T2005. Encapsulation of small, hard-to-access areas can be accompliSHEd quickly and easily, without the need for bulky spray equipment. | ||||
| Advanced Peroxide Cleaner | 8314 | |||
|
PDS MSDS Label |
APC Sell Sheet |
||
|
||||
| Description: | ||||
| IAQ Advanced Peroxide Cleaner is the most advanced cleaner available for the restoration and remediation professional and is formulated specifically for use on mold remediation and water damage restoration projects. IAQ Advanced Peroxide Cleaner aggressively removes stains and odors caused by mold, mildew, bacteria, and other microbial growth on porous, semi-porous, and non-porous materials. Utilizing a proprietary combination of cutting-edge surfactants and advanced hydrogen peroxide, Fiberlock’s IAQ Advanced Peroxide Cleaner produces results that, up until this point, have not been attainable in a contractor friendly formula. When applied, IAQ Advanced Peroxide Cleaner penetrates deep into the substrate. The hydrogen peroxide instantly reacts with organic matter through an oxidation process that produces a high foaming action that lifts the material to the surface. The oxidation process continues for some time after application and results in the brightening of the substrate within 24 hours. IAQ Advanced Peroxide Cleaner does not leave any chemical residues. As the organic material is destroyed IAQ Advanced Peroxide Cleaner simply decomposes to water and oxygen. | ||||
| Aftershock | 8390 | |||
|
PDS MSDS Labels |
ASTM Method D 1653 ASTM G 21 Artificial Weathering Test |
Aftershock Sell Sheet Mold Overview Mold Product Reference |
|
|
1 Gallon: |
|||
| Description: | ||||
| AfterShock is an EPA-registered antimicrobial coating designed to kill residual mold and mildew remaining after pre-cleaning contaminated surfaces. AfterShock also inhibits the future growth and spread of mold and mildew on the cured film surface in residential and institutional buildings. This extremely durable, easy to apply, 100% acrylic sealant offers the ultimate in durability in combination with excellent fungicidal characteristics to address mold growth from water damage. AfterShock is recommended for use on interior wall surfaces such as plaster, wallboard, drywall, concrete, masonry block, wood, primed metal and galvanized metal. AfterShock is also recommended for use on interior wood framing, primed metal, concrete, and wallboard inside the wall cavity. Do not use for HVAC system applications. | ||||
| Child Guard | 5600 | |||
|
PDS MSDS Label 10 Point Specification |
Certifications & Approvals | Lead Overview Lead Product Reference |
|
|
||||
| Description: | ||||
| Child Guard is a thermoplastic elastomeric, water-based, copolymer blended specifically to form a durable yet flexible barrier between lead-based paint and the environment. Child Guard is a high-solids coating formulated to offer unparalleled coverage, economics and paint-like aesthetics while preserving historic and architectural detail. Child Guard contains Bitrex®, a very bitter-tasting, non-toxic antiingestant to discourage oral contact with lead paint. Do not use Child Guard on friction surfaces or movable closures such as door jambs and window jambs. Do not dilute or thin Child Guard. Some states require a surface assessment by a licensed lead inspector before application. Contact your state Department of Health, or Fiberlock for more information. Child Guard has been designated non-toxic by a certified toxicologist. | ||||
| Fiberset PM | 7470-White, 7475-Clear, 7480-Blue | |||
|
PDS MSDS: • 7470, 7475, 7480 Labels: • 7470, 7475, 7480 |
Asbestos Overview Asbestos Product Reference |
||
|
Clear: |
Blue: |
||
| Description: | ||||
| Fiberset PM is a pre-mixed “lockdown” sealing treatment for microscopic residual fibers present after the removal of Asbestos Containing Material (ACM). Fiberset PM is a ready-to-use, Class “I” fire-rated coating that provides a flexible barrier over residual fibers to ensure final air clearance. Fiberset PM is UL® classified for use as a primer for fireproofing replacement materials under the “Encapsulant Materials” section of the UL directory, and is compatible with most leading brands of flooring adhesives. Fiberset PM is a water-based, nontoxic coating that employs advanced 100% acrylic resin technology to extend the life expectancy of airless spray equipment. | ||||
| G - L | Return to Top |
| Grip-Tack | 6408 | |||
|
PDS MSDS Label |
Lead Overview Lead Product Reference |
||
|
||||
| Description: | ||||
| Grip-Tack is a high solids, water based multipurpose lockdown/adhesive for capturing and sealing residual contaminants present before, during, and after demolition or removal projects. Its unique formulation provides a soft, tacky, flexible membrane, which locks down asbestos fibers, lead paint chips and dust to insure final clearance after the removal of lead and/or asbestos. The sticky finish traps lead dust and airborne fibers making it ideal for over-coating lead paint or asbestos prior to their removal or demolition. This product is also suitable for use as a lead paint adhesive primer for use over high gloss surfaces containing lead paint. | ||||
| IAQ 1000 | 8315 | |||
|
PDS MSDS Label |
Mold Overview Mold Product Reference |
||
|
||||
| Description: | ||||
| IAQ 1000 is a hydrogen peroxide based biodegradable, chlorine free cleaner. IAQ 1000 is pH-neutral, and contains an agent that will whiten and brighten while cleaning, but does not contain sodium hypochlorite (bleach). IAQ 1000 is suitable for use in water damage restoration situations to remove odor causing mold, mildew, bacteria, and other microbial growth on porous, semi-porous, and non-porous materials. IAQ 1000 contains no dyes or perfumes, and is not corrosive like many industrial cleaners. IAQ 1000 is specifically designed for cleaning after water damage, sewer backups and floods. IAQ 1000 is supplied in a powerful, ready-to-use formula that can be applied directly from the container. | ||||
| IAQ 2000 | 8320 | |||
|
PDS MSDS Label |
Mold Overview Mold Product Reference |
||
|
||||
| Description: | ||||
| IAQ 2000 is an EPA registered disinfectant and cleaner designed to kill and control fungal, bacterial, and virucidal growth. Fiberlock IAQ 2000 is a concentrated, phosphate free formulation designed to provide effective cleaning, deodorizing, and disinfection specifically for schools, retail business, and commercial buildings, and other places where housekeeping is of prime importance in controlling the hazard of microbial contamination. When used as directed, Fiberlock IAQ 2000 disinfects hard, nonporous, inanimate, environmental surfaces, including floors and walls, that are prone to problems caused by microorganisms. | ||||
| IAQ 2500 | 8325 | |||
|
PDS MSDS Label |
Mold Overview Mold Product Reference |
||
|
||||
| Description: | ||||
| IAQ 2500 is designed specifically as a general non-acid cleaner and disinfectant for use in homes, schools, office buildings, and retail businesses. It is formulated to disinfect hard, nonporous, inanimate environmental surfaces: floors, walls, glazed porcelain, glazed ceramic tile, plastic surfaces, bathrooms and cabinets. For plastic and painted surfaces; spot test on an inconspicuous area before use. A rinse with potable water is required for surfaces in direct contact with food. EFFICACY TESTS HAVE DEMONSTRATED THAT FIBERLOCK IAQ 2500 IS AN EFFECTIVE BACTERICIDE, FUNGICIDE, AND VIRUCIDE, IN THE PRESENCE OF ORGANIC SOIL (5% BLOOD SERUM). | ||||
| IAQ 3000 | 8330 | |||
|
PDS MSDS Label |
Mold Overview Mold Product Reference |
||
|
||||
| Description: | ||||
| IAQ 3000 is a high quality interior and exterior block filler formulated to fill small imperfections and pinholes in masonry block and porous concrete before top coating. This product contains mineral type fillers and fine mineral aggregates which fill voids in masonry surfaces. This 100% acrylic block filler is easy to apply, alkali resistant and provides a uniform surface capable of receiving all types of finish coats. This product is ideal for application to masonry block, concrete, brick and stone. IAQ 3000 is not water sensitive after application and its flexibility and durability are the best available for a block filler, far superior to cementations and PVA type formulations. | ||||
| IAQ 4000 | 8340 | |||
|
PDS MSDS Label |
Mold Overview Mold Product Reference |
||
|
||||
| Description: | ||||
| IAQ 4000 is a rust inhibiting 100% acrylic latex metal coating for use on ferrous metal, galvanized metal and other surfaces exposed to general industrial and atmospheric conditions. IAQ 4000 has excellent water resistance and excellent resistance to most alkalis, detergents and mild acids. This metal coating does not contain the flammable solvents contained in other rust inhibiting paints, has low odor and fast re-coatability. IAQ 4000 is ideal for both new and previously coated roof decks, metal paneling, structural steel, corrugated metal siding, and miscellaneous iron and bar joists. | ||||
| IAQ 5000 | 8350 | |||
|
PDS MSDS Label |
Mold Overview Mold Product Reference |
||
|
||||
| Description: | ||||
| IAQ 5000 is a quick drying, high performance 100% acrylic latex coating specifically designed to prime stained or water damaged surfaces. This stain blocking primer provides exceptional adhesion and stain blocking properties and may be used on interior or exterior surfaces to prevent most bleeding type stains, seal porous surfaces and provide adhesion to hard and glossy surfaces. IAQ 5000 also contains an EPA-registered fungicide to prevent mold growth on the surface at the cured film. IAQ 5000 provides maximum breathability, adhesion, and holdout to prolong the life of the finish. Fiberlock IAQ 5000 is recommended for use on wallboard, plaster, sheetrock, masonry, wood, concrete, aluminum, and galvanized metal. | ||||
| IAQ 6000 | 8360 | |||
|
PDS MSDS Label |
ASTM G 21, D 3273, D 3274 ASTM Method D 1653 |
Mold Overview Mold Product Reference |
|
|
||||
| Description: | ||||
| IAQ 6000 is a white, tintable mold-resistant coating for professional use, that contains an EPA-registered, broad-spectrum fungicide to prevent mold growth on the surface of the cured film. IAQ 6000 is a durable, flexible, and permeable 100% acrylic water-based coating that can withstand the moist, humid conditions present in environments conducive to mold growth. IAQ 6000 has been tested by independent and certified laboratories to prove resistance to mold growth on the surface of the coating, and has successfully passed both ASTM G-21 and ASTM D-3273 mold resistance testing with the highest scores possible. IAQ 6000 is recommended to deter mold growth on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal. IAQ 6000 can also be used on new structural materials to help prevent mold growth during building construction. | ||||
| IAQ 6100 | 8361 | |||
|
PDS MSDS Label |
ASTM G 21 ASTM Method D 1653 |
Mold Overview Mold Product Reference |
|
|
||||
| Description: | ||||
| IAQ 6100 is a clear mold-resistant coating for professional use that contains an EPA-registered, broad-spectrum fungicide to prevent mold growth on the surface of the cured film. IAQ 6100 is a durable, flexible, and permeable 100% acrylic water-based semi-gloss coating that applies white so the user can ensure complete and thorough application, and then dries to a clear finish. The clear coating allows surfaces to retain their natural look and permit future visual inspection of the coated surfaces. IAQ 6100 has been tested by independent and certified laboratories to prove resistance to mold growth on the surface of the coating, and has successfully passed ASTM G-21 mold resistance testing with the highest scores possible. IAQ 6100 is recommended to deter mold growth on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal. IAQ 6100 can also be used on new structural materials to help prevent mold growth during building construction. | ||||
| IAQ 6000HD | 8362 | |||
|
PDS MSDS Label |
ASTM G 21, D 3273, D 3274 | Mold Overview Mold Product Reference |
|
|
||||
| Description: | ||||
| IAQ 6000HD is a white, tintable, high-build mold-resistant coating for professional use in the remediation of mold and the prevention of mold growth during new building construction. This product contains an EPA-registered, broad-spectrum fungicide to prevent mold growth on the surface of the cured film. IAQ 6000HD is a durable and flexible 100% acrylic water-based flat coating that can withstand the moist, humid conditions present in environments conducive to mold growth. IAQ 6000HD is designed for use on non-porous and semi-porous building materials including gypsum wallboard, oriented-strand board (OSB), wood framing timbers, plywood, masonry block, and many other structural surfaces where a flexible, highbuild mold resistant coating is necessary. IAQ 6000HD has been tested by independent and certified laboratories to prove resistance to mold growth on the surface of the coating, and has successfully passed both ASTM G-21 and ASTM D-3273 mold resistance testing with the highest scores possible. When used for mold remediation, IAQ 6000HD is recommended to deter mold growth on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal. | ||||
| IAQ 6040 | 8363 | |||
|
PDS MSDS Label |
ASTM G 21, D 3273, D 3274 | Mold Overview Mold Product Reference |
|
|
||||
| Description: | ||||
| IAQ 6040 is a low-viscosity, translucent violet sealant designed to seal new construction materials and resist fungal growth. This specially formulated, water-based coating contains EPA-registered antimicrobials that inhibit the growth of mold on the surface of the cured film. The low-viscosity 100% acrylic formula is easy to apply, and the translucent finish will not block the appearance of treated building materials. IAQ 6040 can be used on wood, OSB, wallboard, concrete and other construction materials to withstand the moist, humid conditions that provide the ideal environment for fungal growth. | ||||
| IAQ 6500 | 8365 | |||
|
PDS MSDS Label |
Mold Overview Mold Product Reference |
||
|
||||
| Description: | ||||
| IAQ 6500 is a black, mold-resistant coating for professional use that contains an EPA-registered, broad-spectrum fungicide to prevent mold growth on the surface of the cured film. IAQ 6500 is a durable, flexible, and permeable 100% acrylic water-based semi-gloss coating that can withstand the moist, humid conditions present in environments conducive to mold growth. IAQ 6500 has been tested by independent and certified laboratories to prove resistance to mold growth on the surface of the coating, and has successfully passed both ASTM G-21 and ASTM D-3273 mold resistance testing with the highest scores possible. IAQ 6500 is recommended to deter mold growth on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal. IAQ 6500 can also be used on new structural materials to help prevent mold growth during building construction. | ||||
| IAQ 7000 | 8370 | |||
|
PDS MSDS Label |
ASTM G 21 | Mold Overview Mold Product Reference |
|
|
||||
| Description: | ||||
| IAQ 7000 is a quick drying water-based adhesive coating for use on duct liner insulation surfaces. IAQ 7000 is designed to reinforce HVAC insulation materials. IAQ 7000 is manufactured from premium acrylic resins to allow for optimal durability and flexibility and can be used in residential, commercial, or industrial facilities requiring moisture and mold resistance. IAQ 7000 is acceptable for use over faced or unfaced fiberglass duct liner insulation, unfaced fiberglass duct board insulation, and can be used in unlined duct work. IAQ 7000 can also be used as a post-cleaning lockdown of residual particulates. | ||||
| IAQ 7500 | 8375 | |||
|
PDS MSDS Label |
ASTM G 21 | Mold Overview Mold Product Reference |
|
|
||||
| Description: | ||||
| IAQ 7500 is a quick drying water-based adhesive coating for use on duct liner insulation surfaces. IAQ 7500 is designed to reinforce HVAC insulation materials. IAQ 7500 is manufactured from premium acrylic resins to allow for optimal durability and flexibility and can be used in residential, commercial, or industrial facilities requiring moisture and mold resistance. IAQ 7500 is acceptable for use over faced or unfaced fiberglass duct liner insulation, unfaced fiberglass duct board insulation, and can be used in unlined duct work. IAQ 7500 can also be used as a post-cleaning lockdown of residual particulates. | ||||
| IAQ 8000 | 8380 | |||
|
PDS MSDS Label |
ASTM G 21 | Mold Overview Mold Product Reference |
|
|
||||
| Description: | ||||
| IAQ 8000 is a dual-purpose, high performance coating designed for use in ductwork. IAQ 8000 dries to form a durable, flexible, moisture-resistant protective coating. Its semi-gloss finish minimizes dirt buildup on the coating surface that provides nutrients that feed mold colonies. IAQ 8000 is high in viscosity to provide maximum bridging ability on insulation materials and to reduce sagging and dripping when applied to the vertical and top surfaces of unlined duct. IAQ 8000 is manufactured from premium acrylic resins to allow for optimal durability and flexibility necessary for air duct environments. Successfully tested to ASTM standard C-411 “Hot Surface Performance of a Coating on Glass Fiber Blanket Insulation”. ASTM E-84 Class “I” fire rating. Meets requirements of NFPA 90A/90B standard. Additionally, IAQ 8000 was tested in accordance with the procedures outlined in ASTM G 21 and recieved a No. 0 rating (No fungal growth, 0% growth on the specimens). |
||||
| IAQ 8500 | 8385 | |||
|
PDS MSDS Label |
ASTM G 21 | Mold Overview Mold Product Reference |
|
|
||||
| Description: | ||||
| IAQ 8500 is a dual-purpose, high performance coating designed for use in ductwork. IAQ 8500 dries to form a durable, flexible, moisture-resistant protective coating. Its semi-gloss finish minimizes dirt buildup on the coating surface that provides nutrients that feed mold colonies. IAQ 8500 is high in viscosity to provide maximum bridging ability on insulation materials and to reduce sagging and dripping when applied to the vertical and top surfaces of unlined duct. IAQ 8500 is manufactured from premium acrylic resins to allow for optimal durability and flexibility necessary for air duct environments. Successfully tested to ASTM standard C-411 “Hot Surface Performance of a Coating on Glass Fiber Blanket Insulation”. STM E-84 Class “I” fire rating. Meets requirements of NFPA 90A/90B standard. Additionally, IAQ 8500 was tested in accordance with the procedures outlined in ASTM G 21 and recieved a No. 0 rating (No fungal growth, 0% growth on the specimens). |
||||
| IAQ 9000 | 8395 | |||
|
PDS MSDS Label |
ASTM G 21 | IAQ 9000 Sell Sheet Mold Overview Mold Product Reference |
|
|
||||
| Description: | ||||
| IAQ 9000 is a low-odor, waterproofing coating that is specially formulated to stop water from penetrating through a variety of interior and exterior surfaces including above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, and foundations. This latex based formula stops 10psi of water pressure (greater than a wall of water 22 feet high) and reduces radon gas penetration. IAQ 9000 contains an EPA-registered fungicide to help prevent mold from growing on the surface of the cured film. This fast-drying formula may be applied easily with a brush and/or roller on dry surfaces and cleans up easily with soap and water. | ||||
| Klean Pop Shower | 6439 | |||
|
Setup Instructions Klean Pop Data |
|
||
|
||||
| Description: | ||||
| The new patent-pending Klean-Pop shower is a revolution in pop-up shower design. When disassembled, the Klean- Pop offers the easy mobility and compact appearance of a suitcase on wheels. One person can move Klean-Pop wherever it needs to be, and set up the shower in as little as 2 minutes. Priced competitively with telescoping designs, and more durable than plastic options, Klean-Pop answers the growing need for a quality decontamination shower that is inexpensive, durable and easy-to-use. |
||||
| Kontrol Kube Advanced - 8' and 10' Containment Unit | 6550, 6551 | ||||||
| Kontrol Kube Overview Advanced Sell Sheet |
Are You Compliant? Protected Environment |
Setup Instructions NAM Instructions |
Reference List Savings Calculator |
||||
| Low Resolution Image: Right Click Image Above and Click Save As.. High Resolution Images: Click Links below to download. | |||||||
|
|
|
|
||||
|
|
|
|
||||
|
Advanced 10' Profile
NAM & Bases |
Advanced 10' Open
Ladder, Bases & NAM |
Advanced 10' Closed
Ladder, Bases & NAM |
Advanced 8' Open
Bases & NAM |
||||
|
|
|
|
||||
|
|
|
|
||||
|
Advanced 8' & 10'
Units Connected |
Advanced Unit
Compressed |
AirBase with Negative
Air Machine |
Negative Air Machine (NAM)
|
||||
|
|
 |
|
||||
|
|
|
|
||||
|
AirBase
|
Frame Top
|
Frame Base
|
Wheel Base
|
||||
|
 |
 |
 |
||||
|
|
|
|
||||
|
Frame Complete
|
Poles
|
HEPA Filter
|
DOP Filter
|
||||
| Description: | |||||||
| The Kontrol Kube Advanced containment unit incorporates all the elements of the original enclosure and adds new features making it easier to create temporary containment. Durability, flexibility, and function have all been increased making this the most advanced containment enclosure available. The Advanced unit can be used to access both overhead and walls as well as set up as an anteroom to contain larger areas. Manufactured with a NFPA 701 & California Fire Marshal rated synthetic fabric, the Advanced enclosure is over three times stronger than traditional vinyl enclosures. | |||||||
| Kontrol Kube TopSider - 10' Containment Unit | 6552 | |||
|
Setup Instructions Technical Features & Benefits |
Kontrol Kube Overview Reference List Savings Calculator |
||
|
||||
| Description: | ||||
| The Kontrol Kube TopSider eliminates the need for most disposable barrier materials and dramatically reduces labor cost for building containment. The TopSider can be set up in just minutes and then moved quickly and easily from site to site without removing tools, ladder and equipment. | ||||
| Kontrol Kube AirBase | 6542 | |||
|
Setup Instructions | Kontrol Kube Overview | ||
|
||||
| Description: | ||||
| The patent pending Kontrol Kube Negative Air Base attaches quickly and easily to the Kontrol Kube Locking Wheel Base to allow for the complete mobility of ladders, tools, equipment and a negative air machine. This innovative attachment makes moving Kontrol Kube Mobile Containment through a facility a quick and easy task that can be done by one person. | ||||
| Kontrol Kube Negative Air Machine | 6560 | |||
|
NAM Instructions NAM Data |
Kontrol Kube Overview | ||
|
||||
| Description: | ||||
| The Kontrol Kube Complete Negative Air Machine offers a revolutionary combination of power, efficacy and convenience. Weighing in at 44 lbs this negative air machine delivers a variable speed up to 500 CFM with HEPA filter installed. The Kontrol Kube Complete Negative Air Machine also comes equipped with a DOP Stage 2 First Pass Pre-filter to ensure one pass HEPA filtration for air clearance every time! | ||||
| Lag-Kote | 6424 | |||
|
PDS MSDS Label |
Asbestos Overview Asbestos Product Reference |
||
|
||||
| Description: | ||||
| Lag-Kote is a 100% acrylic, high solids encapsulant/sealant specifically formulated for application over a variety of Asbestos Containing Materials (ACM). Tested at Battelle Laboratories of Columbus, Ohio, under EPA Contract # 08-03-2552-T2005, Lag-Kote was found to be acceptable as an asbestos encapsulant. Designed to encase spray-on fireproofing, asbestos-containing plasters and paints, transite, and asbestos-containing thermal insulation, Lag-Kote’s viscous formulation minimizes dripping, cleanup and product waste. Lag-Kote provides a smooth, washable, aesthetically superior finish that will provide years of lasting protection. Lag-Kote has excellent resistance to alkalis and can be applied directly over galvanized metal, wood, masonry or other sound surfaces. UV inhibitors make Lag- Kote suitable for encasement of exterior transite siding and asbestos fortified paint systems. Lag-Kote is water-based and non-toxic. | ||||
| Lag-Kote II | 6420 | |||
|
PDS MSDS Label |
Asbestos Overview Asbestos Product Reference |
||
|
5 Gallon: |
|||
| Description: | ||||
| Lag-Kote II is a thick bridging encapsulant/sealant specifically formulated for application over interior friable Asbestos Containing Material (ACM). It is ideally suited to encapsulate interior pipe lagging, boiler jackets, breeching and other components of heating and ventilation systems. Its thick body minimizes dripping, cleanup and product waste while providing a smooth, washable, aesthetically superior finish that will provide years of protection. Lag-Kote II is a flexible coating that can be applied over galvanized metal, wood, masonry or other sound surfaces to prevent the release of harmful asbestos fibers. | ||||
| Lag-Kloth | 6425, 6426 | |||
|
PDS MSDS: • 6425, 6426 Labels: • 6425, 6426, 6427 Coverage Calculator |
Asbestos Overview Asbestos Product Reference |
||
|
Roll: |
Tape: |
||
| Description: | ||||
| Lag-Kloth is a woven fabric impregnated with an inorganic adhesive, designed to repair and/or cover existing asbestos insulation on pipes, boilers and breeching. Areas that are repaired or re-covered with Lag-Kloth can be successfully top coated with Lag-Kote® or Lag-Kote II for complete encapsulation. The self-contained adhesive contained in Lag-Kloth is water-activated and nonflammable. Lag-Kloth can withstand temperatures up to 600°F. | ||||
| LBC - Lead Barrier Compound | 5800-Antique Linen, 5801-White | |||
|
PDS |
ASTM E 1795-97 Certifications & Approvals |
Lead Overview Lead Product Reference |
|
|
1 Gallon: |
|||
| Description: | ||||
| LBC Lead Barrier Compound (Type III - Interior/Exterior)is a thermoplastic-elastomeric water based copolymer blended specifically to form a barrier between lead-based paint and the environment. It is a high-solids coating formulated to offer unparalleled coverage, economics and aesthetics while preserving historic and architectural detail. LBC contains Bitrex®, a bitter-tasting, nontoxic ingredient to discourage oral contact with lead paint. LBC Complies with all EPA and HUD requirements for lead-based paint encapsulants and is recognized as a permanent method for abatement of lead-based paint. LBC meets all Federal, State and Local standards for lead based paint encapsulants. LBC has been independently tested at David Litter Laboratories, and was found to meet/surpass the ASTM E-1795 Standard for Lead-Based Paint Encapsulants for both indoor and outdoor use. LBC is certified for use in all 50 states. | ||||
| LeadSafe Lead Dust Cleaner | 5496 | |||
|
PDS |
Lead Overview Lead Product Reference |
||
|
1 Quart: |
|||
| Description: | ||||
| LeadSafe Lead Dust Cleaner is a concentrated product designed specifically to assist in the cleanup of lead dust after lead abatement projects, construction/renovations or any other activity which disturbs lead and creates dust. This product has been formulated to remove more lead dust than ordinary cleaning products. LeadSafe cleaner utilizes chelating agents similar to those given to individuals with lead poisoning. These chelating agents lift the lead from the surface, binding to the lead dust and hold it in suspension. | ||||
| LeadSafe Lead Dust Wipes | 5498 | |||
|
PDS |
Lead Overview Lead Product Reference |
||
|
||||
| Description: | ||||
| LeadSafe Lead Dust Wipes are conveniently packaged towelettes presoaked in a trisodium phosphate (TSP) solution to aid in surface preparation and cleaning for the quick removal of harmful lead dust. LeadSafe Wipes are ideal for use before and after any lead abatement project and are a critical part of a conscientious program for the Interim Control of Lead-Based Paint dust hazards. LeadSafe meets all Federal, State, HUD, and EPA guidelines for cleaning and removing lead dust. | ||||
| Lead Shield | 5470-Clear, 5475-Translucent Blue | |||
|
PDS |
Lead Overview Lead Product Reference |
||
|
Blue: |
|||
| Description: | ||||
| Lead Shield is a water based 100% acrylic lockdown with a dual purpose; it binds residual lead-based paint and dust present after removal; and accepts most topical coverings. The clear version of this product sprays on white and dries clear to permit visual inspection of any residual paint. The translucent blue tint speeds up the post removal inspection process after the product has fully cured. The blue tint is advantageous because it enables an inspector to quickly identify areas that LBP has been removed from and subsequently locked down. These unique features assist in obtaining final LBP removal certification. Lead Shield is a one step product which bonds to most surfaces eliminating the need for sanding, priming and sizing recently stripped walls. Lead Shield can be used on both interior and exterior surfaces, and was expressly formulated to prepare these surfaces to accept a final topical covering. Lead Shield should not be used as a substitute for encapsulation. |
||||
| M - R | Return to Top |
| Penewet | 6450 | |||
|
PDS MSDS Label |
Asbestos Overview Asbestos Product Reference |
||
|
||||
| Description: | ||||
| Penewet is a ready-to-use, colorless wetting agent/surfactant solution incorporating advanced concepts in surface chemistry. It provides powerful wetting, penetrating and coalescing of Asbestos Containing Material (ACM) to permit handling and removal of these materials under damp, dust-free conditions. Penewet is a nonflammable, water-based, non-toxic liquid that will not corrode aluminum components of spray equipment. | ||||
| Piranha 2 | 5720 | |||
|
PDS MSDS Label |
Lead Overview Lead Product Reference |
||
|
||||
| Description: | ||||
| Piranha 2 is a heavy duty, fast acting lead- based paint remover. Piranha 2 will attack as many as 30 layers of lead-based paint in a single application. Piranha 2 will also remove the most difficult oil and latex paints, varnishes, shellacs, lacquers and enamels. Piranha 2 is non-flammable and will not raise the grain of wood or corrode metals. This product does not require anti-evaporation paper like many caustics and other weaker solvent formulas. | ||||
| Piranha 4 | 5740 | |||
|
PDS MSDS Label |
Lead Overview Lead Product Reference |
||
|
||||
| Description: | ||||
| Piranha 4 is a solvent-based gel formulated to remove multiple coats of lead-based paint. This fast acting formula starts removing most paints and stubborn coatings in less than one hour, without the use of dangerous chlorinated solvents, caustics or methylene chloride. Gel formulation yields maximum coverage per gallon and has excellent resistance to sagging, enabling it to cling to vertical and overhead surfaces. Piranha 4 has a very slow rate of evaporation keeping it active for hours. Piranha 4 is a unique solvent formulation ideally suited for paint removal from historically significant architectural components since it does not discolor or raise wood grain or require neutralization. Piranha 4 can be used on virtually any substrate to remove oil based paint, latex paint, elastomeric paint, cementitious asbestos paint, epoxy and urethane. | ||||
| Piranha 8 | 5780 | |||
|
PDS MSDS Label |
Lead Overview Lead Product Reference |
||
|
||||
| Description: | ||||
| Piranha 8 is a low odor, alkaline paste paint stripper that liquefies paints on a variety of substrates. Piranha 8 removes most paints, varnishes, polyurethanes, and water-based latex paints from metal, stone, concrete, marble, plaster wall, ceiling and decorative plaster. Piranha 8 can remove multiple coats safely and easily in a single application. Piranha 8 is particularly well suited for stripping lead paints. Surfaces must be neutralized after using this remover. | ||||
| Power Block | 5450 | |||
|
PDS MSDS Label |
Lead Overview Lead Product Reference |
||
|
||||
| Description: | ||||
| Power Block is a quick drying, high performance 100% acrylic latex coating specifically designed to prime stained or water damaged surfaces that contain lead-based paint. This stain blocking primer provides exceptional adhesion and stain blocking properties and may be used on interior or exterior surfaces to prevent most bleeding type stains, seal porous surfaces and provide adhesion to hard and glossy surfaces. It is environmentally friendly, free of lead, mercury, and formaldehyde hazard and complies with all federal and state VOS/VOC requirements. Recommended Uses: Wallboard, Plaster, Sheetrock, Masonry, Wood, Concrete, Aluminum, Galvanized Metal, Plastic Laminates, Vinyl Wallcoverings, Under Wallcoverings. | ||||
| Power Rust Stop | 5493 | |||
|
PDS MSDS Label |
Lead Overview Lead Product Reference |
||
|
||||
| Description: | ||||
| Power Rust Stop is a rust inhibiting 100% acrylic latex metal coating for use on ferrous metal, galvanized metal and other surfaces exposed to general industrial and atmospheric conditions. Power Rust Stop has excellent aliphatic solvent and water resistance and excellent resistance to most alkalies, detergents and mild acids. This acrylic latex metal coating does not contain the flammable solvents contained in other rust inhibiting paints, and has low odor. Recommended Uses: Ideal for painting both new and previously painted roof decks, metal paneling, structural steel, corrugated metal siding, storage tank exteriors, miscellaneous iron and bar joists. | ||||
| PowerStone Plus | 5489 | |||
|
PDS MSDS Label |
Lead Overview Lead Product Reference |
||
|
||||
| Description: | ||||
| PowerStone Plus is a clear multipurpose waterborne acrylic primer that provides protection to a large variety of surfaces. This highly alkali resistant coating resists household cleaners, gasoline, oil, and efflorescence. PowerStone Plus seals brick, block and poured concrete to reduce water penetration and prevent surface dusting and staining. PowerStone Plus can be applied to both horizontal and vertical surfaces and is ideal for use on concrete, plaster, brick, slate, and stucco. Clean metal surfaces of copper and aluminum can be finished with PowerStone Plus to prevent surface oxidation. A topcoat is recommended for exterior use. | ||||
| RECON Citrus Solvent Cleaner | 3022 | |||
|
PDS MSDS Label |
|||
|
||||
| Description: | ||||
| RECON Citrus Solvent Cleaner is an advanced degreaser/ deodorizer that utilizes the best available natural materials to keep pace with today’s envionmental regulations. Powerful biodegradable, solvents are specially blended to outperform most conventional petroleum based solvents, plus have the added advantage of being water dilutable. This multipurpose concentrate instantly emulsifies grease, oils and fats without the use of harsh acids, caustics/alkalines, petroleum distillates, butyl solvents, chlorinated solvents, or ozone depleters. This organic extract based product has an extremely powerful and pleasant natural citrus fragrance to deodorize effectively even under the most extreme conditions. The vapors from this product leave the area smelling clean with an orange scent. | ||||
| RECON Extreme Duty Cleaner | 3024 | |||
|
PDS MSDS Label |
|||
|
||||
| Description: | ||||
| RECON Extreme Duty Cleaner is one of the most powerful products available anywhere. Formulated to handle the most extreme cleaning jobs, this high pH, caustic fortified, butyl based product provides superior ease of use in removing grease, oils, fats, carbon, wax, tar and other stubborn soils. This is a very high pH butyl cleaner for cleaning and removing the worst deposits in fire, smoke and water damage restoration applications. For use on walls and most other hard surfaces. | ||||
| RECON Heavy Duty Cleaner | 3027 | |||
|
PDS MSDS Label |
|||
|
||||
| Description: | ||||
| RECON Heavy Duty Cleaner is a very powerful, water soluble, cleaner/degreaser. Due to its chemical potency, this product is extremely effective in the removal of heavy accumulations of grease, oil, fats, carbon, ink, wax, dirt and soot, tar and asphalt, creosote, rust stains, and many soils. Contains HydroSolv 2000 technology, a fast acting powerful solubilizing agent that dissolves and suspends any soil, allowing it to be wiped or rinsed away completely. | ||||
| RECON Extreme Odor Counteractant | 3041 | |||
|
PDS MSDS Label |
|||
|
||||
| Description: | ||||
| RECON Extreme Duty Odor Counteractant is a highly concentrated liquid odor counteractant formulated specificaly for the treatment of surfaces after fire, water or smoke damage. This product chemically neutralizes the source of malodors and imparts a pleasant, longlasting fragrance. The powerful multi-purpose odor counteractant removes malodors caused by tobacco, smoke, urine, mildew, vomit, body waste, pets, garbage, fire-produced odors, food spills and cooking odors. Ideal for use in institutions, hospitals, apartments, sanitariums, restaurants, factories, schools, hotels, kitchens, restrooms, latrines, septic systems, dumpsters, paper mills, recreational vehicles or anywhere malodors are a problem. May also be used as a deodorant booster for carpet cleaners and general-purpose cleaners. | ||||
| S - Z | Return to Top |
| Shockwave | 8310 | |||
|
PDS MSDS Label Efficacy Overview |
Shockwave Sell Sheet Mold Overview Mold Product Reference |
||
|
10 oz: |
|||
| Description: | ||||
| ShockWave is an EPA-registered disinfectant, sanitizer and cleaner designed specifically for mold remediation contractors. ShockWave is designed to meet all your disinfecting, sanitizing, cleaning, and de-odorizing needs. ShockWave is strong enough to be used as a hospital grade disinfectant, and has been specifically formulated to be used on both porous and non-porous materials. ShockWave is a powerful concentrated quaternary ammonium chloride blend that yields up to 64 gallons of usable product from every gallon of concentrate. ShockWave has over 130 organism kill claims including Aspergillus niger, Penecillium spinulosum, E. coli, Salmonella, HIV, Hepatitis-B, Herpes, Poliovirus, and many other pathogenic and environmental microbial organisms. | ||||
| Shockwave RTU | 8316 | |||
|
PDS MSDS Label Efficacy Overview |
Shockwave RTU Sell Sheet Mold Overview Mold Product Reference |
||
|
1 Gallon: |
|||
| Description: | ||||
| ShockWaveRTU is an EPA-registered disinfectant, sanitizer and cleaner designed specifically for mold remediation contractors. ShockWaveRTU is designed to meet all your disinfecting, sanitizing, cleaning, and deodorizing needs. ShockWaveRTU is strong enough to be used as a hospital grade disinfectant, and has been specifically formulated to be used on both porous and non-porous materials. ShockWaveRTU is a powerful ready-to- use quaternary ammonium chloride blend, which is ideal for use when clean water is not readily available or for any situation where a ready-to-use formula is required. | ||||
| Shockwave Green24 | 8319 | |||
|
PDS MSDS Label Efficacy Overview |
Shockwave Green24 Sell Sheet Mold Overview Mold Product Reference |
||
|
1 Gallon: |
|||
| Description: | ||||
| ShockWave Green24 is a broad spectrum, non-corrosive, odorless, colorless, botanical based disinfectant. ShockWave Green24 kills the most deadly microorganisms, yet is safe for everyday use. ShockWave Green24 is the first new disinfectant technology approved by the EPA in over 30 years. This next generation disinfectant works twenty times faster than traditional disinfectants and provides 24 hour residual efficacy. | ||||
| TBC - Transite Barrier Compound | 6497 | |||
|
PDS MSDS Label |
Asbestos Overview Asbestos Product Reference |
||
|
||||
| Description: | ||||
|
TBC is an elastomeric thermoplastic water based copolymer, blended specifically to seal exterior asbestos containing Industrial Fiber Cement Board (Transite®). TBC is a high solids, non-toxic blend of resins that forms a hard yet flexible finish which is ultraviolet resistant and mildew resistant. It is environmentally friendly and complies with all federal and state VOC requirements. |
||||
