 Degreaser/Cleaners |
|
|
||
 Anilox Roll Cleaners |
|
|
Industrial Paint Strippers
Powder Coating Strippers
Solvent Recovery SystemsPaint Remover and Powder Coating Stripper Selection
Solvent Kleene's D-Zolve non methylene chloride, environmentally preferred paint strippers and coating removers are designed to strip and remove powder coatings, electrocoatings, aircraft paints (such as cross linked polyurethane top coats with epoxy primer), CARC paints and marine fiberglass paints. These products are used for stripping powder coated ferrous and non-ferrous metals, stripping powder coated aluminum and powder coated zinc, stripping powder coated aluminum zinc alloys and for stripping paint from aluminum, zinc, magnesium and other non-ferrous metals. D-Zolve depainting and powder coating stripping products can be used in an immersion tank or applied to a substrate using a brush or airless spray equipment. Powder coatings, autophoretic and E-coatings can be removed from aluminum, zinc, stainless steels, carbon steels, magnesium, fiberglass and plastic surfaces. D-Zolve 338 is a special formulation designed to remove solvent based, water based or UV based dry ink build up. The charts below will help you select the most suitable stripper for your stripping and paint removal application.
| Stripping Application | D-Zolve 1012 |
D-Zolve 1220 |
D-Zolve 917 |
D-Zolve 15-33R |
D-Zolve 15-33 IM |
D-Zolve 338 |
|---|---|---|---|---|---|---|
| Powder Coatings | Yes | Yes | Yes | Yes | Yes | – |
| Electrocoatings | Yes | Yes | Yes | Yes | – | – |
| Aircraft Paints | – | Yes | Yes | Yes | Yes | – |
| Wet Paint | Some | Yes | Yes | Yes | Yes | Yes |
| Fiberglass Paints | – | Yes | Yes | – | – | – |
| Dry Ink Removal | – | – | – | – | – | Yes |
Typical Uses
Degreasing and Cleaning Product Selection
Solvent Kleene offers a range of safe solvent based and water-based D-Greeze products designed to safely remove grease, oil, flax and grime from metal surfaces. D-Greeze environmentally friendly metal cleaners and degreasers are non-hazardous, non-air polluting (non HAP), non-chlorinated, and non-flammable. They are designed as high performance quick acting cleaner and degreasers. The D-Greeze family of products addresses non-flammable drying requirements, fast drying needs, and air blow off drying applications. D-Greeze oil, grease, flax and grime removers are heavy-duty industrial strength products that can be used with immersion tanks and ultra sonic systems or used to clean the surface using either aerosol spray, wand spray or rag wipe off. All degreaser cleaner products are compatible with all ferrous and non-ferrous metals. The chart below will help you select the most suitable degreaser cleaner for your application.
| Cleaning Product | D-Greeze 500 | D-Greeze 1000 | D-Greeze 6201 | D-Greeze 2603 | D-Greeze ES | D-Greeze ES-150D |
|---|---|---|---|---|---|---|
| Solvent Based | Yes | Yes | – | – | Yes | Yes |
| Surfactant Based | – | – | Yes | – | – | – |
| Water Based | – | – | – | Yes | – | – |
| Very Fast Drying | – | – | – | – | Yes | Yes |
| Quick Drying | – | Yes | – | – | Yes | Yes |
| Rinsing Needed | – | – | Yes | Yes | – | – |
| Air Blow Dry | Yes | Yes | After Rinse | After Rinse | Yes | Yes |
| Dilutable | – | – | Yes | Yes | – | – |
| Heavy Duty | Yes | Yes | Yes | Yes | Yes | Yes |
